Professor Sophie Primig

Back to

Professor Sophie Primig

Professor

Graduate Certificate of Management (2021), Australian Graduate School of Management, ��Ʊ Sydney
Graduate Certificate of University Learning and Teaching (2018), ��Ʊ Sydney
Ph.D. in Mining and Metallurgical Engineering (2012), Montanuniversitaet Leoben (Austria)
M.Eng. in Materials Science and Engineering (2008), Montanuniversitaet Leoben (Austria)

Science

School of Materials Science & Engineering

ARC Future��Fellow, 2025 - current
Alcoa Distinguished Professor, Apr 2024 - current
Professor, School of Materials Science and Engineering, ��Ʊ Sydney, Australia, 2023 - current
��Ʊ Scientia Program, 2019 - 2022
ARC DECRA Fellow, 2018 - 2020
Lecturer, Senior Lecturer, Associate Professor, School of Materials Science and Engineering, ��Ʊ Sydney, Australia, 2015 - 2022
Senior Scientist and Head of the ‘High Performance Materials and Steels’ group, Department of Physical Metallurgy and Materials Testing, Montanuniversitaet Leoben (Austria), 2013 - 2015
Postdoctoral Fellow, Christian Doppler Laboratory 'Early Stages of Precipitation', Montanuniversitaet Leoben (Austria), 2012 - 2013

Phone

+61 2 9385-5284

E-mail

s.primig@unsw.edu.au

Location

Room 346, Hilmer Building, E10 Kensington, New South Wales, 2033 Australia

Book Chapters | 2021

Primig S; Theska F; Haghdadi N, 2021, 'Electron Microscopy Methods', in Encyclopedia of Materials: Metals and Alloys, pp. 203 - 211,
Journal articles | 2025

Chen H; Zhou H; Cui X; Czettl C; Weirather T; Pachlhofer J; Mueller P; Teppernegg T; Useldinger R; Primig S; Ringer SP, 2025, 'Effect of WC/WC grain boundary misorientation angle on the local hardness in WC–Co cemented carbides', Scripta Materialia, 259, pp. 116525 - 116525,

Journal articles | 2025

Farabi E; He X; Obersteiner D; Musi M; Neves J; Klein T; Primig S, 2025, 'Synergistic precipitation reactions in a novel high-temperature Ti-alloy', Scripta Materialia, 259, pp. 116543 - 116543,

Journal articles | 2025

Haines MP; Farabi E; Haghdadi N; Primig S, 2025, 'On the martensitic phase transformation and grain boundary character evolution in laser powder bed fusion 17-4 precipitation hardened stainless steel', Journal of Materials Science, 60, pp. 3430 - 3453,

Journal articles | 2025

He XY; Rielli VV; Liu Q; Li XP; Luzin V; Haghdadi N; Primig S, 2025, 'Effects of laser powder bed fusion parameters on the delta-ferrite to austenite phase transformation in duplex stainless steels', Additive Manufacturing, 107, pp. 104825 - 104825,

Journal articles | 2025

He XY; Xu ZP; Rohrer G; Kong C; Primig S; Haghdadi N, 2025, 'Effect of template δ-ferrite microstructures on the ferrite-to-austenite phase transformation and interphase boundary character distributions in additively manufactured duplex stainless steels', Materialia, pp. 102509 - 102509,

Journal articles | 2025

He XY; Xu ZP; Rohrer GS; Kong C; Primig S; Haghdadi N, 2025, 'Three-dimensional analysis of the delta-ferrite to austenite phase transformation in an additively manufactured duplex stainless steel', Materials Characterization, 221, pp. 114745 - 114745,

Journal articles | 2025

Lasisi AM; Farabi E; Klein T; Primig S, 2025, 'The influence of microstructure heterogeneity on the tensile deformation behaviour of cold metal transfer additively manufactured Ti6Al4V', Journal of Alloys and Compounds, 1010, pp. 178257 - 178257,

Journal articles | 2025

Lu R; Theska F; Lu S; Wang H; Qian M; Primig S; Ringer SP; Liao X, 2025, 'An Efficient Method for Preparing High-Quality Atom Probe Tomography Samples of Dual-Phase Ti Alloys', Microscopy and Microanalysis, 31, pp. ozaf009,

Journal articles | 2025

Luo M; Chen H; Liao X; Ringer SP; Hughes AE; Haghdadi N; Primig S; Laleh M, 2025, 'Towards in-situ grain boundary engineering in additively manufactured stainless steel 316 L via reused powder', Acta Materialia, 297, pp. 121387 - 121387,

Journal articles | 2025

Luo M; Wang H; Rielli VV; Liao X; Ringer SP; Primig S; Haghdadi N; Vieira Rielli V, 2025, 'Grain boundary character evolution in stainless steel 316L upon laser powder-bed fusion and post-process heat treatment', Materials Science and Engineering A, 927, pp. 148029 - 148029,

Journal articles | 2025

Theska F; Schulz B; Lison-Pick M; Street SR; Primig S, 2025, 'Precipitation-controlled grain boundary engineering in a cast & wrought Ni-based superalloy', Journal of Alloys and Compounds, 1010, pp. 177131 - 177131,

Journal articles | 2025

Theska F; Street SR; Lison-Pick M; Paul MJ; Gludovatz B; Primig S, 2025, 'On the mechanisms controlling grain boundary cracking in Ni-based superalloy René 41 with boron and carbon additions', Materials and Design, 256, pp. 114283 - 114283,

Journal articles | 2025

Zhou H; Chen H; Czettl C; Weirather T; Pachlhofer J; Mueller P; Teppernegg T; Useldinger R; Primig S; Ringer SP, 2025, 'Identification and accurate characterisation of the metastable CoFCC phase in WC–Co cemented carbides', Materials Characterization, 223, pp. 114915 - 114915,

Journal articles | 2024

Adomako NK; Haghdadi N; Liao X; Ringer SP; Primig S, 2024, 'Thermal cycle induced solid-state phase evolution in IN718 during additive manufacturing: A physical simulation study', Journal of Alloys and Compounds, 976, pp. 173181,

Journal articles | 2024

Adomako NK; Haghdadi N; Primig S, 2024, 'Advancing the understanding of metal additive manufacturing via physical simulation and in situ transmission electron microscopy: a viewpoint', Journal of Materials Science, 59, pp. 20221 - 20240,

Journal articles | 2024

Adomako NK; Haines M; Haghdadi N; Primig S, 2024, 'On the role of the preheat temperature in electron-beam powder bed fusion processed IN718', Additive Manufacturing Letters, 11, pp. 100238 - 100238,

Journal articles | 2024

Al-Lami J; Theska F; Ahuactzin-Garcia E; Primig S; Davies C; Pham MS, 2024, 'On the origin of thermal dependence of 3D printed Inconel 718: Roles of atom clustering', Applied Materials Today, 40, pp. 102414 - 102414,

Journal articles | 2024

Buerstmayr R; Schulz B; Povoden-Karadeniz E; Kozeschnik E; Lison-Pick M; Primig S, 2024, 'Improved Thermodynamic Descriptions of Carbides in Ni-Based Superalloys', JOM, 76, pp. 2283 - 2301,

Journal articles | 2024

Farabi E; Haghdadi N; Czettl C; Pachlhofer J; Rohrer GS; Ringer SP; Primig S, 2024, 'On the fcc to hcp transformation in a Co-Ru alloy: Variant selection and intervariant boundary character', Scripta Materialia, 248, pp. 116127 - 116127,

Journal articles | 2024

Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, 'New insights into the kinetics of dynamic and post-dynamic softening in Alloy 718 engine disks', Materials and Design, 247, pp. 113423 - 113423,

Journal articles | 2024

Farabi E; Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Ringer SP; Primig S; Vieira Rielli V, 2024, 'Advancing structure − property homogeneity in forged Alloy 718 engine disks: A pathway towards enhanced performance', Materials and Design, 242, pp. 112987,

Journal articles | 2024

Haghdadi N; Breen AJ; Chen H; Theska F; Davids WJ; Liao XZ; Rohrer GS; Ringer SP; Primig S, 2024, 'New insights into the character of austenite-ferrite boundaries in an additively manufactured duplex stainless steel', Scripta Materialia, 245, pp. 116049,

Journal articles | 2024

Haines MP; Moyle MS; Rielli VV; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Site-specific Cu clustering and precipitation in laser powder-bed fusion 17–4 PH stainless steel', Scripta Materialia, 241, pp. 115891,

Journal articles | 2024

He XY; Wang H; Liao XZ; Ringer SP; Haghdadi N; Primig S, 2024, 'Nano-twining and deformation-induced martensitic transformation in a duplex stainless steel 2205 fabricated by laser powder bed fusion', Additive Manufacturing, 84, pp. 104110,

Journal articles | 2024

Lim B; Nomoto K; Clarke AJ; Babu SS; Primig S; Liao X; Breen AJ; Ringer SP, 2024, 'Corrigendum to “On the interplay of internal voids, mechanical properties, and residual stresses in additively manufactured Haynes 282” [Addit. Manuf. 75 (2023) 103749] (Additive Manufacturing (2023) 75, (S2214860423003627), (10.1016/j.addma.2023.103749))', Additive Manufacturing, 79,

Journal articles | 2024

Luo M; Liao X; Ringer SP; Primig S; Haghdadi N, 2024, 'Grain boundary network evolution in electron-beam powder bed fusion nickel-based superalloy Inconel 738', Journal of Alloys and Compounds, 972, pp. 172811,

Journal articles | 2024

Luo M; Rielli VV; Farabi E; Liao X; Ringer SP; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Grain boundary crystallography and segregation in Ni-based superalloy INC738 manufactured by electron-beam powder bed fusion in as-built and annealed conditions', Materials Characterization, 217, pp. 114421 - 114421,

Journal articles | 2024

Moyle MS; Haghdadi N; Luzin V; Salvemini F; Liao XZ; Ringer SP; Primig S, 2024, 'Correlation of microstructure, mechanical properties, and residual stress of 17-4 PH stainless steel fabricated by laser powder bed fusion', Journal of Materials Science and Technology, 198, pp. 83 - 97,

Journal articles | 2024

Moyle MS; Haghdadi N; Theska F; Haines MP; Liao XZ; Ringer SP; Primig S, 2024, 'Effect of compositional variations on the heat treatment response in 17-4 PH stainless steel fabricated by laser powder bed fusion', Materials Characterization, 209, pp. 113768,

Journal articles | 2024

Rielli VV; Contieri RJ; Primig S; Vieira Rielli V, 2024, 'Chemical origins of β-Ti stabilization via B4C additions in metastable β-Ti alloys and composites', Scientific Reports, 14, pp. 24666,

Journal articles | 2024

Rielli VV; Farabi E; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, 'γʹ and γ″ co-precipitation phenomena in directly aged Alloy 718 with high δ-phase fractions', Materials & Design, 241, pp. 112961 - 112961,

Journal articles | 2024

Rielli VV; Luo M; Farabi E; Haghdadi N; Primig S; Vieira Rielli V, 2024, 'Interphase boundary segregation in IN738 manufactured via electron-beam powder bed fusion', Scripta Materialia, 244, pp. 116033,

Journal articles | 2024

Rielli VV; Pham TD; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2024, 'Effects of standard heat treatment on micro-to nanostructure heterogeneities in a Rene 65 Ni-based superalloy billet', Materials Science and Engineering A, 913, pp. 147069 - 147069,

Journal articles | 2024

Schulz B; Theska F; Leitner T; Hafok M; Primig S, 2024, 'Discontinuous γ′ nucleation due to Boron and Carbon segregation in Ni-based superalloys', Journal of Alloys and Compounds, 1008, pp. 176459 - 176459,

Journal articles | 2024

Theska F; Primig S, 2024, 'Interfacial excess of solutes across phase boundaries using atom probe microscopy', Ultramicroscopy, 256, pp. 113885,

Journal articles | 2024

Wang H; Dong BS; Chen ZB; Liu JQ; Haghdadi N; Lu RQ; Primig S; Wang ZY; Pan ZX; Li HJ; Ringer SP; Liao XZ, 2024, 'Effect of compositional heterogeneity on the mechanical properties of a single-phase Cu-9Al alloy with different grain sizes', Acta Materialia, 263, pp. 119531,

Journal articles | 2023

Adomako NK; Haghdadi N; Dingle JFL; Kozeschnik E; Liao X; Ringer SP; Primig S, 2023, 'Predicting solid-state phase transformations during metal additive manufacturing: A case study on electron-beam powder bed fusion of Inconel-738', Additive Manufacturing, 76, pp. 103771,

Journal articles | 2023

Buerstmayr R; Theska F; Kozeschnik E; Webster RF; Lison-Pick M; Street S; Primig S, 2023, 'Investigation and Simulation of the Effects of nm-Scale γ′ Precipitates on the Recrystallization of Ni-based Superalloys', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 54, pp. 2259 - 2276,

Journal articles | 2023

Farabi E; Klein T; Schnall M; Primig S, 2023, 'Effects of high deposition rate during cold metal transfer additive manufacturing on microstructure and properties of Ti-6Al-4V', Additive Manufacturing, 71, pp. 103592,

Journal articles | 2023

Haines MP; Moyle MS; Rielli VV; Luzin V; Haghdadi N; Primig S; Vieira Rielli V, 2023, 'Experimental and computational analysis of site-specific formation of phases in laser powder bed fusion 17–4 precipitate hardened stainless steel', Additive Manufacturing, 73, pp. 103686,

Journal articles | 2023

Lim B; Nomoto K; Clarke AJ; Babu SS; Primig S; Liao X; Breen AJ; Ringer SP, 2023, 'On the interplay of internal voids, mechanical properties, and residual stresses in additively manufactured Haynes 282', Additive Manufacturing, 75, pp. 103749,

Journal articles | 2023

Primig S, 2023, 'On the Role of Interfaces During Metal Additive Manufacturing', Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada, 29, pp. 1420,

Journal articles | 2023

Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2023, 'On the control of nanoprecipitation in directly aged Alloy 718 via hot deformation parameters', Scripta Materialia, 226, pp. 115266,

Journal articles | 2023

Schulz B; Haghdadi N; Leitner T; Hafok M; Primig S, 2023, 'Advancing analytical electron microscopy methodologies to characterise microstructural features in superalloys', Ultramicroscopy, 247, pp. 113699,

Journal articles | 2023

Schulz B; Haghdadi N; Leitner T; Hafok M; Primig S, 2023, 'Dynamic recrystallisation via nucleation at distorted twins in a Ni-based superalloy', Journal of Alloys and Compounds, 936, pp. 168318,

Journal articles | 2023

Schulz B; Leitner T; Hafok M; Primig S, 2023, 'Advancements in processing of Ni-based superalloys by microstructure engineering via discontinuous γ′ break-down', Materialia, 31, pp. 101873,

Journal articles | 2023

Schulz B; Leitner T; Primig S, 2023, 'In-situ observation of the incipient melting of borides and its effect on the hot-workability of Ni-based superalloys', Journal of Alloys and Compounds, 956, pp. 170324,

Journal articles | 2023

Theska F; Street SR; Lison-Pick M; Primig S, 2023, 'Grain boundary microstructure-property relationships in the cast & wrought Ni-based superalloy René 41 with boron and carbon additions', Acta Materialia, 258, pp. 119235,

Journal articles | 2023

Theska F; Tse WF; Schulz B; Buerstmayr R; Street SR; Lison-Pick M; Primig S, 2023, 'Review of Microstructure–Mechanical Property Relationships in Cast and Wrought Ni-Based Superalloys with Boron, Carbon, and Zirconium Microalloying Additions', Advanced Engineering Materials, 25,

Journal articles | 2023

Theska F; Webster RF; Street SR; Lison-Pick M; Primig S, 2023, 'Co-precipitation of M2B on ZrO2 in a Ni-base superalloy with B & Zr additions', Materials Chemistry and Physics, 310, pp. 128466,

Journal articles | 2022

Breen AJ; Day AC; Theska F; Lim B; Davids W; Primig S; Ringer SP, 2022, 'Expanding the Limits of Atom Probe Crystallographic Analysis', Microscopy and Microanalysis, 28, pp. 756 - 758,

Journal articles | 2022

Breen AJ; Theska F; Lim B; Primig S; Ringer SP, 2022, 'Advanced quantification of the site-occupancy in ordered multi-component intermetallics using atom probe tomography', Intermetallics, 145, pp. 107538,

Journal articles | 2022

Chakraborty A; Webster RF; Primig S, 2022, 'Lath martensite substructure evolution in low-carbon microalloyed steels', Journal of Materials Science, 57, pp. 10359 - 10378,

Journal articles | 2022

Gontijo M; Chakraborty A; Webster RF; Ilie S; Six J; Primig S; Sommitsch C, 2022, 'Thermomechanical and Microstructural Analysis of the Influence of B- and Ti-Content on the Hot Ductility Behavior of Microalloyed Steels', Metals, 12, pp. 1808,

Journal articles | 2022

Haghdadi N; Chen H; Chen Z; Babu S; Liao X; Ringer S; Primig S, 2022, 'Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel', Scripta Materialia, 219, pp. 114894,

Journal articles | 2022

Haghdadi N; Ledermueller C; Chen H; Chen Z; Liu Q; Li X; Rohrer G; Liao X; Ringer S; Primig S, 2022, 'Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment', Materials Science and Engineering A, 835, pp. 142695,

Journal articles | 2022

Haines MP; Rielli VV; Primig S; Haghdadi N; Vieira Rielli V, 2022, 'Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques', Journal of Materials Science, 57, pp. 14135 - 14187,

Journal articles | 2022

Hazarabedian MS; Haghdadi N; Primig S; Lison-Pick M; Quadir MZ; Ferry M; Iannuzzi M, 2022, 'Formation of intergranular phases in precipitation hardening nickel-based alloy 725', Acta Materialia, 236,

Journal articles | 2022

He XY; Wang H; Zhu ZG; Wang LZ; Liu JQ; Haghdadi N; Nai SML; Huang J; Primig S; Ringer SP; Liao XZ, 2022, 'Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion', Journal of Materials Science, 57, pp. 9714 - 9725,

Journal articles | 2022

Jinschek J; Primig S; Proust G, 2022, 'Preface to the special issue: microstructure design in metal additive manufacturing—physical metallurgy revisited', Journal of Materials Science, 57, pp. 9525 - 9526,

Journal articles | 2022

Kwabena Adomako N; Haghdadi N; Primig S; Adomako NK, 2022, 'Electron and laser-based additive manufacturing of Ni-based superalloys: A review of heterogeneities in microstructure and mechanical properties', Materials and Design, 223, pp. 111245,

Journal articles | 2022

Laleh M; Haghdadi N; Hughes AE; Primig S; Tan MYJ, 2022, 'Enhancing the repassivation ability and localised corrosion resistance of an additively manufactured duplex stainless steel by post-processing heat treatment', Corrosion Science, 198, pp. 110106,

Journal articles | 2022

Lim B; Chen H; Nomoto K; Chen Z; Saville AI; Vogel S; Clarke AJ; Paradowska A; Reid M; Primig S; Liao X; Babu SS; Breen AJ; Ringer SP, 2022, 'Additively manufactured Haynes-282 monoliths containing thin wall struts of varying thicknesses', Additive Manufacturing, 59, pp. 103120,

Journal articles | 2022

Moyle M; Ledermueller C; Zou Z; Primig S; Haghdadi N, 2022, 'Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion', Materials Characterization, 184, pp. 111663,

Journal articles | 2022

Moyle MS; Haghdadi N; Davids WJ; Liao XZ; Ringer SP; Primig S, 2022, 'Evidence of in-situ Cu clustering as a function of laser power during laser powder bed fusion of 17–4 PH stainless steel', Scripta Materialia, 219, pp. 114896,

Journal articles | 2022

Moyle MS; Haghdadi N; Liao XZ; Ringer SP; Primig S, 2022, 'On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder bed fusion: Towards textural design', Journal of Materials Science and Technology, 117, pp. 183 - 195,

Journal articles | 2022

Nie S; Chin RL; Soufiani AM; Mehl T; Theska F; Haghdadi N; Primig S; Chan C; Trupke T; Hameiri Z, 2022, 'Temperature sensitivity maps of silicon wafers from photoluminescence imaging: The effect of gettering and hydrogenation', Progress in Photovoltaics Research and Applications, 30, pp. 1298 - 1311,

Journal articles | 2022

Primig S, 2022, 'Editorial: The June 2022 cover paper', Journal of Materials Science, 57, pp. 9527 - 9529,

Journal articles | 2022

Rielli VV; Piglione A; Pham MS; Primig S; Vieira Rielli V, 2022, 'On the detailed morphological and chemical evolution of phases during laser powder bed fusion and common post-processing heat treatments of IN718', Additive Manufacturing, 50, pp. 102540,

Journal articles | 2022

Rielli VV; Theska F; Primig S, 2022, 'Correlative Approach for Atom Probe Sample Preparation of Interfaces Using Plasma Focused Ion Beam Without Lift-Out', Microscopy and Microanalysis, 28, pp. 998 - 1008,

Journal articles | 2022

Rielli VV; Theska F; Yao Y; Best JP; Primig S; Vieira Rielli V, 2022, 'Local composition and nanoindentation response of δ-phase and adjacent γ′′-free zone in a Ni-based superalloy', Materials Research Letters, 10, pp. 301 - 309,

Journal articles | 2022

Theska F; Buerstmayr R; Liu H; Lison-Pick M; Street SR; Primig S, 2022, 'Influence of grain boundary precipitation and segregation on cracking of cast and wrought superalloys containing B and Zr', Materials Characterization, 187, pp. 111881,

Journal articles | 2022

Theska F; Yang Y; Sisco KD; Plotkowski A; Primig S, 2022, 'On the high-temperature stability of the Al8Cu3Ce intermetallic in an additively manufactured Al-Cu-Ce-Zr alloy', Materials Characterization, 191, pp. 112109,

Journal articles | 2022

Wang H; Chao Q; Chen HS; Chen ZB; Primig S; Xu W; Ringer SP; Liao XZ, 2022, 'Formation of a transition V-rich structure during the α' to α + β phase transformation process in additively manufactured Ti-6Al-4 V', Acta Materialia, 235, pp. 118104,

Journal articles | 2022

Wang H; Chao Q; Cui XY; Chen ZB; Breen AJ; Cabral M; Haghdadi N; Huang QW; Niu RM; Chen HS; Lim B; Primig S; Brandt M; Xu W; Ringer SP; Liao XZ, 2022, 'Introducing C phase in additively manufactured Ti-6Al-4V: A new oxygen-stabilized face-centred cubic solid solution with improved mechanical properties', Materials Today, 61, pp. 11 - 21,

Journal articles | 2021

Bahl S; Sisco K; Yang Y; Theska F; Primig S; Allard LF; Michi RA; Fancher C; Stump B; Dehoff R; Shyam A; Plotkowski A, 2021, 'Al-Cu-Ce(-Zr) alloys with an exceptional combination of additive processability and mechanical properties', Additive Manufacturing, 48, pp. 102404,

Journal articles | 2021

Buerstmayr R; Theska F; Webster R; Lison-Pick M; Primig S, 2021, 'Correlative analysis of grain boundary precipitates in Ni-based superalloy René 41', Materials Characterization, 178, pp. 111250,

Journal articles | 2021

Chakraborty A; Primig S, 2021, 'Influence of Finish Rolling Temperature and Molybdenum Addition on Strengthening of Low Carbon Niobium Steels—A Computational and Experimental Study', Steel Research International, 92,

Journal articles | 2021

Davids WJ; Chen H; Nomoto K; Wang H; Babu S; Primig S; Liao X; Breen A; Ringer SP, 2021, 'Phase transformation pathways in Ti-6Al-4V manufactured via electron beam powder bed fusion', Acta Materialia, 215, pp. 117131,

Journal articles | 2021

DeMott R; Haghdadi N; Gandomkar Z; Liao X; Ringer S; Primig S, 2021, 'Formation and 3D morphology of interconnected α microstructures in additively manufactured Ti-6Al-4V', Materialia, 20,

Journal articles | 2021

DeMott R; Haghdadi N; Kong C; Gandomkar Z; Kenney M; Collins P; Primig S, 2021, '3D electron backscatter diffraction characterization of fine α titanium microstructures: collection, reconstruction, and analysis methods', Ultramicroscopy, 230, pp. 113394,

Journal articles | 2021

DeMott R; Haghdadi N; Liao X; Ringer SP; Primig S, 2021, '3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4��V', Journal of Materials Science, 56, pp. 14763 - 14782,

Journal articles | 2021

Haghdadi N; Laleh M; Chen H; Chen Z; Ledermueller C; Liao X; Ringer S; Primig S, 2021, 'On the pitting corrosion of 2205 duplex stainless steel produced by laser powder bed fusion additive manufacturing in the as-built and post-processed conditions', Materials and Design, 212, pp. 110260,

Journal articles | 2021

Haghdadi N; Laleh M; Moyle M; Primig S, 2021, 'Additive manufacturing of steels: a review of achievements and challenges', Journal of Materials Science, 56, pp. 64 - 107,

Journal articles | 2021

Laleh M; Hughes AE; Tan MY; Rohrer GS; Primig S; Haghdadi N, 2021, 'Grain boundary character distribution in an additively manufactured austenitic stainless steel', Scripta Materialia, 192, pp. 115 - 119,

Journal articles | 2021

Lim B; Chen H; Chen Z; Haghdadi N; Liao X; Primig S; Babu SS; Breen AJ; Ringer SP, 2021, 'Microstructure-property gradients in Ni-based superalloy (Inconel 738) additively manufactured via electron beam powder bed fusion', Additive Manufacturing, 46, pp. 102121,

Journal articles | 2021

Piglione A; Attard B; Vieira Rielli V; Santos Maldonado CT; Attallah MM; Primig S; Pham MS, 2021, 'On the constitutive relationship between solidification cells and the fatigue behaviour of IN718 fabricated by laser powder bed fusion', Additive Manufacturing, 47, pp. 102347,

Journal articles | 2021

Rielli VV; Godor F; Gruber C; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2021, 'Effects of processing heterogeneities on the micro- to nanostructure strengthening mechanisms of an alloy 718 turbine disk', Materials and Design, 212, pp. 110295,

Journal articles | 2021

Rielli VV; Theska F; Godor F; Stanojevic A; Oberwinkler B; Primig S; Vieira Rielli V, 2021, 'Evolution of nanoscale precipitates during common Alloy 718 ageing treatments', Materials and Design, 205, pp. 109762,

Journal articles | 2021

Wang H; Chao Q; Yang L; Cabral M; Song ZZ; Wang BY; Primig S; Xu W; Chen ZB; Ringer SP; Liao XZ, 2021, 'Introducing transformation twins in titanium alloys: an evolution of α-variants during additive manufacturing', Materials Research Letters, 9, pp. 119 - 126,

Journal articles | 2020

DeMott R; Collins P; Kong C; Liao X; Ringer S; Primig S, 2020, '3D electron backscatter diffraction study of α lath morphology in additively manufactured Ti-6Al-4V', Ultramicroscopy, 218, pp. 113073,

Journal articles | 2020

Eizadjou M; Chen H; Czettl C; Pachlhofer J; Primig S; Ringer SP, 2020, 'An observation of the binder microstructure in WC-(Co+Ru) cemented carbides using transmission Kikuchi diffraction', Scripta Materialia, 183, pp. 55 - 60,

Journal articles | 2020

Haghdadi N; DeMott R; Stephenson PL; Liao XZ; Ringer SP; Primig S, 2020, 'Five-parameter characterization of intervariant boundaries in additively manufactured Ti-6Al-4V', Materials and Design, 196, pp. 109177,

Journal articles | 2020

Haghdadi N; Primig S; Annasamy M; Cizek P; Hodgson PD; Fabijanic DM, 2020, 'Dynamic recrystallization in AlXCoCrFeNi duplex high entropy alloys', Journal of Alloys and Compounds, 830,

Journal articles | 2020

Haghdadi N; Primig S; Annasamy M; Cizek P; Hodgson PD; Fabijanic DM, 2020, 'On the hot-worked microstructure of a face-centered cubic Al0.3CoCrFeNi high entropy alloy', Scripta Materialia, 178, pp. 144 - 149,

Journal articles | 2020

Haghdadi N; Whitelock E; Lim B; Chen H; Liao X; Babu SS; Ringer SP; Primig S, 2020, 'Multimodal γ′ precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing', Journal of Materials Science, 55, pp. 13342 - 13350,

Journal articles | 2020

Ledermueller C; Pratiwi HI; Webster RF; Eizadjou M; Ringer SP; Primig S, 2020, 'Microalloying effects of Mo versus Cr in HSLA steels with ultrafine-grained ferrite microstructures', Materials and Design, 185,

Journal articles | 2020

Ledermueller C; Zhu H; Li H; Primig S, 2020, 'An Initial Report on the Structure–Property Relationships of a High-Strength Low-Alloy Steel Subjected to Advanced Thermomechanical Processing in Ferrite', Steel Research International, 91,

Journal articles | 2020

Small KA; Clayburn Z; DeMott R; Primig S; Fullwood D; Taheri ML, 2020, 'Interplay of dislocation substructure and elastic strain evolution in additively manufactured Inconel 625', Materials Science and Engineering A, 785,

Journal articles | 2020

Stephenson PL; Haghdadi N; DeMott R; Liao XZ; Ringer SP; Primig S, 2020, 'Effect of scanning strategy on variant selection in additively manufactured Ti-6Al-4V', Additive Manufacturing, 36, pp. 101581,

Journal articles | 2020

Theska F; Nomoto K; Godor F; Oberwinkler B; Stanojevic A; Ringer SP; Primig S, 2020, 'On the early stages of precipitation during direct ageing of Alloy 718', Acta Materialia, 188, pp. 492 - 503,

Journal articles | 2020

Theska F; Stanojevic A; Oberwinkler B; Primig S, 2020, 'Microstructure-property relationships in directly aged Alloy 718 turbine disks', Materials Science and Engineering A, 776,

Journal articles | 2020

Wang H; Zhu ZG; Chen H; Wang AG; Liu JQ; Liu HW; Zheng RK; Nai SML; Primig S; Babu SS; Ringer SP; Liao XZ, 2020, 'Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting', Acta Materialia, 196, pp. 609 - 625,

Journal articles | 2019

Chen H; Cooper C; Durrant C; Li Y; Primig S; Liao X; Babu SS; Ringer SP, 2019, 'Graded Microstructure of Additive Manufactured Ti-6Al-4V via Electron Beam Melting', Microscopy and Microanalysis, 25, pp. 498 - 499,

Journal articles | 2019

Hollerweger R; Riedl H; Arndt M; Kolozsvari S; Primig S; Mayrhofer PH, 2019, 'Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings', Thin Solid Films, 688,

Journal articles | 2019

Ledermueller C; Kozeschnik E; Webster RF; Primig S, 2019, 'Advanced Thermo-mechanical Process for Homogenous Hierarchical Microstructures in HSLA Steels', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 50, pp. 5800 - 5815,

Journal articles | 2019

Theska F; Ceguerra AV; Turk C; Breen AJ; Ringer SP; Primig S, 2019, 'Correlative study of lattice imperfections in long-range ordered, nano-scale domains in a Fe-Co-Mo alloy', Ultramicroscopy, 204, pp. 91 - 100,

Journal articles | 2019

Theska F; Ringer SP; Primig S, 2019, 'Atom Probe Microscopy of Strengthening Effects in Alloy 718', Microscopy and Microanalysis, 25, pp. 470 - 480,

Journal articles | 2019

Wang H; Zhu ZG; Chen HS; Nai SM; An XH; Zheng RK; Primig S; Ringer SP; Liao XZ, 2019, 'Effect of Cyclic Thermal Loadings on the Microstructural Evolution of a Cantor Alloy in 3D Printing Processes', Microscopy and Microanalysis, 25, pp. 2568 - 2569,

Journal articles | 2018

Drexler A; Oberwinkler B; Primig S; Turk C; Povoden-Karadeniz E; Heinemann A; Ecker W; Stockinger M, 2018, 'Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718', Materials Science and Engineering A, 723, pp. 314 - 323,

Journal articles | 2018

Hofer C; Bliznuk V; Verdiere A; Petrov R; Winkelhofer F; Clemens H; Primig S, 2018, 'High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel', Materials Characterization, 144, pp. 182 - 190,

Journal articles | 2018

Ledermueller C; Li H; Primig S, 2018, 'Engineering Hierarchical Microstructures via Advanced Thermo-Mechanical Processing of a Modern HSLA Steel', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 49, pp. 6337 - 6350,

Journal articles | 2018

Leitner K; Scheiber D; Jakob S; Primig S; Clemens H; Povoden-Karadeniz E; Romaner L, 2018, 'How grain boundary chemistry controls the fracture mode of molybdenum', Materials and Design, 142, pp. 36 - 43,

Journal articles | 2018

Maric M; Muránsky O; Karatchevtseva I; Ungár T; Hester J; Studer A; Scales N; Ribárik G; Primig S; Hill MR; Muransky O, 2018, 'The effect of cold-rolling on the microstructure and corrosion behaviour of 316L alloy in FLiNaK molten salt', Corrosion Science, 142, pp. 133 - 144,

Journal articles | 2018

Schulz B; Andersen HL; Al Bahri OK; Johannessen B; Liu J; Primig S; Sharma N, 2018, 'Electrochemical performance and structure of Al2W3-: XMoxO12', Crystengcomm, 20, pp. 1352 - 1360,

Journal articles | 2018

Theska F; Stanojevic A; Oberwinkler B; Ringer SP; Primig S, 2018, 'On conventional versus direct ageing of Alloy 718', Acta Materialia, 156, pp. 116 - 124,

Journal articles | 2017

Ahmadi MR; Rath M; Povoden-Karadeniz E; Primig S; Wojcik T; Danninger A; Stockinger M; Kozeschnik E, 2017, 'Modeling of precipitation strengthening in Inconel 718 including non-spherical γ" precipitates', Modelling and Simulation in Materials Science and Engineering, 25, pp. 055005,

Journal articles | 2017

Breen AJ; Babinsky K; Day AC; Eder K; Oakman CJ; Trimby PW; Primig S; Cairney JM; Ringer SP, 2017, 'Correlating Atom Probe Crystallographic Measurements with Transmission Kikuchi Diffraction Data', Microscopy and Microanalysis, 23, pp. 279 - 290,

Journal articles | 2017

Hofer C; Primig S; Clemens H; Winkelhofer F; Schnitzer R, 2017, 'Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel', Advanced Engineering Materials, 19,

Journal articles | 2017

Lang D; Povoden-Karadeniz E; Schatte J; Knabl W; Clemens H; Primig S, 2017, 'Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities', Journal of Alloys and Compounds, 695, pp. 372 - 381,

Journal articles | 2017

Leitner (née Babinsky) K; Felfer PJ; Holec D; Cairney J; Knabl W; Lorich A; Clemens H; Primig S, 2017, 'On grain boundary segregation in molybdenum materials', Materials and Design, 135, pp. 204 - 212,

Journal articles | 2017

Primig S; Stechauner G; Kozeschnik E, 2017, 'Early Stages of Cu Precipitation in 15–5 PH Maraging Steel Revisited − Part I: Experimental Analysis', Steel Research International, 88,

Journal articles | 2017

Ragger KS; Primig S; Daniel R; Kaiser R; Paal J; Mitterer C; Buchmayr B, 2017, 'Cold pilgering of duplex steel tubes: The response of austenite and ferrite to excessive cold deformation up to high strains', Materials Characterization, 128, pp. 257 - 268,

Journal articles | 2017

Stechauner G; Primig S; Kozeschnik E, 2017, 'Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited – Part II: Thermokinetic Simulation', Steel Research International, 88,

Journal articles | 2017

Turk C; Leitner H; Schemmel I; Clemens H; Primig S, 2017, 'Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy', Micron, 98, pp. 24 - 33,

Journal articles | 2017

Verdiere A; Hofer C; De Waele S; Bliznuk V; Primig S; Cottenier S; Tran MD; Pennings B; Kestens LAI; Petrov RH, 2017, 'Precipitation in simultaneously nitrided and aged Mo-containing maraging steel', Materials Characterization, 131, pp. 21 - 30,

Journal articles | 2016

Babinsky K; Primig S; Knabl W; Lorich A; Stickler R; Clemens H, 2016, 'Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests', JOM, 68, pp. 2854 - 2863,

Journal articles | 2016

Hofer C; Bliznuk V; Verdiere A; Petrov R; Winkelhofer F; Clemens H; Primig S, 2016, 'Correlative microscopy of a carbide-free bainitic steel', Micron, 81, pp. 1 - 7,

Journal articles | 2016

Hofer C; Winkelhofer F; Clemens H; Primig S, 2016, 'Morphology change of retained austenite during austempering of carbide-free bainitic steel', Materials Science and Engineering A, 664, pp. 236 - 246,

Journal articles | 2016

Lang D; Karge L; Schatte J; Gilles R; Dallinger R; Weißensteiner I; Staron P; Knabl W; Primig S; Clemens H, 2016, 'Evolution of strain-induced hafnium carbides in a molybdenum base Mo–Hf–C alloy studied by small-angle neutron scattering and complementary methods', Journal of Alloys and Compounds, 688, pp. 619 - 631,

Journal articles | 2016

Lang D; Pöhl C; Holec D; Schatte J; Povoden-Karadeniz E; Knabl W; Clemens H; Primig S, 2016, 'On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy', Journal of Alloys and Compounds, 654, pp. 445 - 454,

Journal articles | 2016

Sackl S; Leitner H; Clemens H; Primig S, 2016, 'On the evolution of secondary hardening carbides during continuous versus isothermal heat treatment of high speed steel HS 6-5-2', Materials Characterization, 120, pp. 323 - 330,

Journal articles | 2016

Sackl S; Zuber M; Clemens H; Primig S, 2016, 'Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 47, pp. 3694 - 3702,

Journal articles | 2016

Turk C; Leitner H; Kellezi G; Clemens H; Gan WM; Staron P; Primig S, 2016, 'Impact of the B2 ordering behavior on the mechanical properties of a FeCoMo alloy', Materials Science and Engineering A, 662, pp. 511 - 518,

Journal articles | 2015

Babinsky K; Knabl W; Lorich A; De Kloe R; Clemens H; Primig S, 2015, 'Grain boundary study of technically pure molybdenum by combining APT and TKD', Ultramicroscopy, 159, pp. 445 - 451,

Journal articles | 2015

Haslberger P; Turk C; Babinsky K; Caliskanoglu D; Clemens H; Primig S, 2015, 'Boron Grain Boundary Segregation in a Heat Treatable Steel', BHM Berg- und Hüttenmännische Monatshefte, 160, pp. 204 - 208,

Journal articles | 2015

Hofer C; Clemens H; Primig S, 2015, 'Preparation of carbide-free bainitic steels for EBSD investigations', Praktische Metallographie Practical Metallography, 52, pp. 384 - 395

Journal articles | 2015

Hofer C; Leitner H; Winkelhofer F; Clemens H; Primig S, 2015, 'Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel', Materials Characterization, 102, pp. 85 - 91,

Journal articles | 2015

Lang D; Schatte J; Knabl W; Clemens H; Primig S, 2015, 'Texture Evolution during Deformation of a Mo-Hf-C Alloy Studied with Electron Backscatter Diffraction', BHM Berg- und Hüttenmännische Monatshefte, 160, pp. 226 - 230,

Journal articles | 2015

Lang D; Schatte J; Knabl W; Dallinger R; Clemens H; Primig S, 2015, 'Evolution of strain-induced precipitates in a molybdenum base MO-HF-C alloy', Advances in Powder Metallurgy and Particulate Materials Proceedings of the 2015 International Conference on Powder Metallurgy and Particulate Materials Powdermet 2015

Journal articles | 2015

Lang D; Schatte J; Knabl W; Dallinger R; Clemens H; Primig S, 2015, 'Evolution of strain-induced precipitates in a molybdenum-base Mo-Hf-C alloy', International Journal of Powder Metallurgy, 51, pp. 21 - 25

Journal articles | 2015

Mayer S; Hawranek G; Mendez-Martin F; Panzenböck M; Pölzl S; Primig S; Rashkova B; Clemens H, 2015, 'The role of metallography in the development and characterization of high-performance materials', Praktische Metallographie Practical Metallography, 52, pp. 59 - 74,

Journal articles | 2015

Primig S; Clemens H; Knabl W; Lorich A; Stickler R, 2015, 'Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum', International Journal of Refractory Metals and Hard Materials, 48, pp. 179 - 186,

Journal articles | 2015

Primig S, 2015, 'Advanced Structure-Property Relationships: Made in Styria!', BHM Berg- und Hüttenmännische Monatshefte, 160, pp. 203 - 203,

Journal articles | 2015

Sackl S; Clemens H; Primig S, 2015, 'Investigation of the self tempering effect of martensite by means of atom probe tomography', Praktische Metallographie Practical Metallography, 52, pp. 374 - 383,

Journal articles | 2015

Turk C; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Influence of the sample preparation technique on the μ phase fraction analysis in a Fe-25Co-15Mo alloy by means of XRD', Praktische Metallographie Practical Metallography, 52, pp. 323 - 333,

Journal articles | 2014

Babinsky K; De Kloe R; Clemens H; Primig S, 2014, 'A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction', Ultramicroscopy, 144, pp. 9 - 18,

Journal articles | 2014

Babinsky K; Knabl W; Lorich A; De Kloe R; Clemens H; Primig S, 2014, 'Grain boundary study of technically pure molybdenum by combining APT and TKD', Ultramicroscopy,

Journal articles | 2014

Babinsky K; Weidow J; Knabl W; Lorich A; Leitner H; Primig S, 2014, 'Atom probe study of grain boundary segregation in technically pure molybdenum', Materials Characterization, 87, pp. 95 - 103,

Journal articles | 2014

Hollerweger R; Riedl H; Paulitsch J; Arndt M; Rachbauer R; Polcik P; Primig S; Mayrhofer PH, 2014, 'Origin of high temperature oxidation resistance of Ti-Al-Ta-N coatings', Surface and Coatings Technology, 257, pp. 78 - 86,

Journal articles | 2014

Lang D; Pöhl C; Schatte J; Primig S; Leitner H, 2014, 'On the precipitation mechanism in the molybdenum based alloy MHC (Mo-Hf-C)', Powder Metallurgy, 57, pp. 311 - 313,

Journal articles | 2014

Nöhrer M; Mayer W; Primig S; Zamberger S; Kozeschnik E; Leitner H, 2014, 'Influence of deformation on the precipitation behavior of Nb(CN) in austenite and ferrite', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 45, pp. 4210 - 4219,

Journal articles | 2014

Primig S; Leitner H; Kozeschnik E, 2014, 'Early Stages of Precipitation: Experiments and Modelling', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 5 - 11,

Journal articles | 2014

Ressel G; Parz P; Primig S; Leitner H; Clemens H; Puff W, 2014, 'New findings on the atomistic mechanisms active during mechanical milling of a Fe-Y2O3 model alloy', Journal of Applied Physics, 115,

Journal articles | 2014

Ressel G; Primig S; Leitner H, 2014, 'The effect of zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 45, pp. 1552 - 1558,

Journal articles | 2014

Sackl S; Leitner H; Zuber M; Clemens H; Primig S, 2014, 'Induction Hardening vs Conventional Hardening of a Heat Treatable Steel', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 45, pp. 5657 - 5666,

Journal articles | 2014

Sackl S; Leitner H; Zuber M; Clemens H; Primig S, 2014, 'Induction Hardening vs Conventional Hardening of a Heat Treatable Steel', Metallurgical and Materials Transactions A,

Journal articles | 2014

Zacharias H; Arndt J; Primig S, 2014, 'Einfluss der Mikrolegierung (Nb, Al, N) auf die Feinkornbeständigkeit von Einsatzstählen vom Typ 18CrNiMo7−6', BHM Berg- und Hüttenmännische Monatshefte, 159, pp. 296 - 297,

Journal articles | 2013

Nöhrer M; Zamberger S; Primig S; Leitner H, 2013, 'Atom probe study of vanadium interphase precipitates and randomly distributed vanadium precipitates in ferrite', Micron, 54-55, pp. 57 - 64,

Journal articles | 2013

Ressel G; Primig S; Leitner H, 2013, 'The evolution of y distribution during the processing route of mechanically alloyed iron studied by means of atom probe tomography', International Journal of Materials Research, 104, pp. 1088 - 1095,

Journal articles | 2012

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Influence of the heating rate on the recrystallization behavior of molybdenum', Materials Science and Engineering A, 535, pp. 316 - 324,

Journal articles | 2012

Primig S; Leitner H; Knabl W; Lorich A; Clemens H; Stickler R, 2012, 'Textural evolution during dynamic recovery and static recrystallization of molybdenum', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 43, pp. 4794 - 4805,

Journal articles | 2012

Primig S; Leitner H; Knabl W; Lorich A; Stickler R, 2012, 'Static recrystallization of molybdenum after deformation below 0.5*TM (K)', Metallurgical and Materials Transactions A Physical Metallurgy and Materials Science, 43, pp. 4806 - 4818,

Journal articles | 2011

Primig S; Leitner H; Lorich A; Knabl W; Clemens H; Stickler R, 2011, 'SEM and TEM investigations of recovery and recrystallization in technically pure molybdenum', Praktische Metallographie Practical Metallography, 48, pp. 344 - 355,

Journal articles | 2011

Primig S; Leitner H, 2011, 'Separation of overlapping retained austenite decomposition and cementite precipitation reactions during tempering of martensitic steel by means of thermal analysis', Thermochimica Acta, 526, pp. 111 - 117,

Journal articles | 2010

Primig S; Leitner H; Clemens H; Lorich A; Knabl W; Stickler R, 2010, 'On the recrystallization behavior of technically pure molybdenum', International Journal of Refractory Metals and Hard Materials, 28, pp. 703 - 708,

Journal articles | 2010

Primig S; Leitner H; Clemens H; Stickler R; Lorich A; Knabl W; Köck W, 2010, 'Erholungs- und Rekristallisationsverhalten von technisch reinem Molybdän', BHM Berg- und Hüttenmännische Monatshefte, 155, pp. 20 - 25,

Journal articles | 2010

Primig S; Leitner H, 2010, 'Transformation from continuous-to-isothermal aging applied on a maraging steel', Materials Science and Engineering A, 527, pp. 4399 - 4405,
Conference Papers | 2025

Breen AJ; Theska F; Lee H; Ringer SP; Primig S, 2025, 'Rapid 3D Characterisation of Grain Boundaries at the Atomic-Scale Using Atom Probe Tomography', in Rapid 3D Characterisation of Grain Boundaries at the Atomic-Scale Using Atom Probe Tomography, ScienceOpen, presented at 13th Asia Pacific Microscopy Congress 2025,

Conference Abstracts | 2022

Breen AJ; Day AC; Theska F; Lim B; Davids W; Primig S; Ringer SP, 2022, 'Expanding the Limits of Atom Probe Crystallographic Analysis', in Microscopy and Microanalysis, Oxford University Press (OUP), Vol. 28, pp. 756 - 758,

Preprints | 2022

Kühbach M; Rielli VV; Primig S; Saxena A; Mayweg D; Jenkins B; Antonov S; Reichmann A; Kardos S; Romaner L; Brockhauser S, 2022, On Strong-Scaling and Open-Source Tools for High-Throughput Quantification of Material Point Cloud Data: Composition Gradients, Microstructural Object Reconstruction, and Spatial Correlations,

Preprints | 2021

Theska F; Nomoto K; Godor F; Oberwinkler B; Stanojevic A; Ringer SP; Primig S, 2021, On the early stages of precipitation during direct ageing of Alloy 718,

Conference Papers | 2015

Hofer C; Winkelhofer F; Krammerbauer J; Clemens H; Primig S, 2015, 'Atom probe tomography of carbides occurring in "carbide-free" bainitic steels', in Materials Today Proceedings, pp. S925 - S928,

Conference Papers | 2015

Mayer W; Sackl S; Shan YV; Primig S; Kozeschnik E, 2015, 'Evolution of precipitates and martensite substructure during continuous heat treatment', pp. S619 - S622,

Conference Papers | 2015

Primig S; Stechauner G; Kozeschnik E, 2015, 'Early stages of Cu precipitation in 15-5 PH maraging steel revisited - Experiments and modelling', in Ptm 2015 Proceedings of the International Conference on Solid Solid Phase Transformations in Inorganic Materials 2015, pp. 169 - 170

Conference Papers | 2015

Sackl S; Kellezi G; Leitner H; Clemens H; Primig S, 2015, 'Comparison of continuous and isothermal tempering of a high speed steel', in Ptm 2015 Proceedings of the International Conference on Solid Solid Phase Transformations in Inorganic Materials 2015, pp. 99 - 100

Conference Paper

�����Ʊ

Follow

Professor Sophie Primig

Follow me

��Ʊ